SIMOS18 5G0906259C – MapPack & DAMOS for SW SC800LB600000
The identifiers 5G0906259C and SC800LB600000 describe this software version. Compare the vehicle details, then upload your original file to view the definitions available for it.
Identifiers for this software version
| Controller | SIMOS18 |
|---|---|
| Manufacturer | Siemens/Continental |
| Part number | 5G0906259C |
| Controller number | 5G0906259C / G0906259C |
| Software version | SC800LB600000 |
| Software revision | 0002 |
| ECU / TCU | ECU |
SIMOS18 / 5G0906259C
Associated vehicles and engines
CHHA/CXDA · Benzin · 1.984 l · 230 PS · 169 kW · 350 Nm
2016 · Automatik
CHHA/CXDA · Benzin · 1.984 l · 350 Nm
CHHA/CXDA · Benzin · 1.984 l · 230 PS · 169 kW · 350 Nm
CHHA/CXDA · Benzin · 2.0 l · 230 PS · 169 kW
2017 · Automatik
CHHA/CXDA · Benzin · 1.984 l · 350 Nm
CHHA/CXDA · Benzin · 1.984 l · 230 PS · 169 kW · 350 Nm
CHHA/CXDA · Benzin · 1.984 l · 220 PS · 162 kW · 350 Nm
2014
CHHA/CXDA · Benzin · 1.984 l · 230 PS · 169 kW · 350 Nm
2016 · DSG
CHHA/CXDA · Benzin · 1.984 l · 230 PS · 169 kW · 350 Nm
2017 · DSG
CHHA/CXDA · Benzin · 1.984 l · 219 PS · 161 kW · 350 Nm
2016 · Automatik
Reading and original file
Recorded reading tools: AutoTuner · Magicmotorsport Flex OBD · Autoflasher OBD · bFlash · CMDFlash · Flex Boot
Recorded file types: Partial – partially coded · Complete binary file (metadata) · bFlash master
These details describe recorded examples, not a guarantee for any tool, protocol or complete read. A file marked complete may still be a Virtual Read. Analysis requires a complete, unencrypted original BIN or ORI from the actual software version.
MapPack and DAMOS for SIMOS18
SIMOS entries are organised by the specific control unit and software version. For similar designations, also compare the part number, vehicle and engine. This helps locate a recorded version without assuming that a shared vehicle model means identical files.
MapPack organises detected definitions by function, while DAMOS keeps the original names. Both offers relate to the analysed upload. Use the preview to choose the scope appropriate for your SIMOS project.
Engine calibration may involve driver demand, torque, load and, where applicable, boost pressure. Identified groups appear in the preview.
Two definition scopes, the same original file
MapPack organises relevant maps into clearly named functional groups. DAMOS generally covers many more definitions and retains the original names. Both products are supplied as CSV for WinOLS. Modified calibration values and a native A2L file are not part of this promise.
Map counts and previews come from your analysis. No unverified counts are assigned to this catalogue entry.
Questions about this software version
Will this MapPack fit a different software number?
The ECU designation alone does not establish a match. Upload the original file from the actual software version. The preview shows definitions identified for that file; a catalogue entry is not a compatibility guarantee.
Will I receive an A2L file or a WinOLS CSV?
This portal supplies definitions as CSV for WinOLS. A2L is a different description format. The DAMOS product contains reliably identified definitions with original names; it does not promise a native A2L file or modified calibration values.
Can I use an encrypted Slave file?
Use a complete, unencrypted original BIN or ORI. A tool name alone does not confirm file completeness or the software version. Encrypted Slave files cannot be analysed directly.