MG1CS003 DME8.4.1-B48-LK-B20-O0-F030-EU6-HGAG--_LL-RL-AWD-EPS10.2_PVL___________________#EPST:R1C9A1G1B______#R1C9A1G1BADHX3 – MapPack & DAMOS for SW R1C2A1G1B
The identifiers DME8.4.1-B48-LK-B20-O0-F030-EU6-HGAG--_LL-RL-AWD-EPS10.2_PVL___________________#EPST:R1C9A1G1B______#R1C9A1G1BADHX3 and R1C2A1G1B describe this software version. Compare the vehicle details, then upload your original file to view the definitions available for it.
Identifiers for this software version
| Controller | MG1CS003 |
|---|---|
| Manufacturer | Bosch |
| Part number | DME8.4.1-B48-LK-B20-O0-F030-EU6-HGAG--_LL-RL-AWD-EPS10.2_PVL___________________#EPST:R1C9A1G1B______#R1C9A1G1BADHX3 |
| Controller number | R1C9A1G1BADHX3 |
| Software version | R1C2A1G1B |
| Software revision | R1C9A1G1B |
| ECU / TCU | ECU |
MG1CS003 / MG 1 CS003 / DME8.4.1-B48-LK-B20-O0-F030-EU6-HGAG--_LL-RL-AWD-EPS10.2_PVL___________________#EPST:R1C9A1G1B______#R1C9A1G1BADHX3
Associated vehicles and engines
B48B20O0 · Benzin · 1.998 l · 252 PS · 185 kW
2017 · Automatik · EU6
Reading and original file
Recorded reading tools: CMDFlash
Recorded file types: Partial – partially coded
These details describe recorded examples, not a guarantee for any tool, protocol or complete read. A file marked complete may still be a Virtual Read. Analysis requires a complete, unencrypted original BIN or ORI from the actual software version.
MapPack and DAMOS for MG1CS003
The MG1 family contains different ECU designations and software versions. A matching vehicle model narrows the search but does not replace comparing identifiers. The linked entries lead to available part numbers, software versions and their associated vehicle information.
Some MG1 units are offered only on request. These exceptions are identified on the relevant entry and take precedence over the standard MG1 pricing rule. For regular entries, upload your original file to inspect the definition scope offered for purchase.
Engine calibration may involve driver demand, torque, load and, where applicable, boost pressure. Identified groups appear in the preview.
Two definition scopes, the same original file
MapPack organises relevant maps into clearly named functional groups. DAMOS generally covers many more definitions and retains the original names. Both products are supplied as CSV for WinOLS. Modified calibration values and a native A2L file are not part of this promise.
Map counts and previews come from your analysis. No unverified counts are assigned to this catalogue entry.
Questions about this software version
Will this MapPack fit a different software number?
The ECU designation alone does not establish a match. Upload the original file from the actual software version. The preview shows definitions identified for that file; a catalogue entry is not a compatibility guarantee.
Will I receive an A2L file or a WinOLS CSV?
This portal supplies definitions as CSV for WinOLS. A2L is a different description format. The DAMOS product contains reliably identified definitions with original names; it does not promise a native A2L file or modified calibration values.
Can I use an encrypted Slave file?
Use a complete, unencrypted original BIN or ORI. A tool name alone does not confirm file completeness or the software version. Encrypted Slave files cannot be analysed directly.