CPEGD3 TX3TRMTN901N_7D0 – MapPack & DAMOS for SW TBCP3LD00F00060K
The identifiers TX3TRMTN901N_7D0 and TBCP3LD00F00060K describe this software version. Compare the vehicle details, then upload your original file to view the definitions available for it.
Identifiers for this software version
| Controller | CPEGD3 |
|---|---|
| Manufacturer | Kefico |
| Part number | — |
| Controller number | TX3TRMTN901N_7D0 |
| Software version | TBCP3LD00F00060K |
| Software revision | — |
| ECU / TCU | ECU |
CPEGD3 / TX3TRMTN901N_7D0
Associated vehicles and engines
1.0 l · 100 PS · 74 kW
2021
G3LC · Benzin · 998.0 cm³ · 100 PS · 74 kW · 172.0 Nm
2022 · 6
Reading and original file
Recorded reading tools: AutoTuner OBD · CMDFlash Bench
Recorded file types: Complete binary file (metadata)
These details describe recorded examples, not a guarantee for any tool, protocol or complete read. A file marked complete may still be a Virtual Read. Analysis requires a complete, unencrypted original BIN or ORI from the actual software version.
MapPack and DAMOS for CPEGD3
Not every control unit belongs to one of the commonly searched families. The complete ECU designation, manufacturer and software identifier still help establish the relevant entry. Linked vehicle and software pages show the available records and their technical details.
First check whether the project concerns an engine ECU or a transmission TCU. Then upload its original file. Analysis determines which definitions are offered, and the preview presents that scope before you decide whether to purchase.
Engine calibration may involve driver demand, torque, load and, where applicable, boost pressure. Identified groups appear in the preview.
Two definition scopes, the same original file
MapPack organises relevant maps into clearly named functional groups. DAMOS generally covers many more definitions and retains the original names. Both products are supplied as CSV for WinOLS. Modified calibration values and a native A2L file are not part of this promise.
Map counts and previews come from your analysis. No unverified counts are assigned to this catalogue entry.
Questions about this software version
Will this MapPack fit a different software number?
The ECU designation alone does not establish a match. Upload the original file from the actual software version. The preview shows definitions identified for that file; a catalogue entry is not a compatibility guarantee.
Will I receive an A2L file or a WinOLS CSV?
This portal supplies definitions as CSV for WinOLS. A2L is a different description format. The DAMOS product contains reliably identified definitions with original names; it does not promise a native A2L file or modified calibration values.
Can I use an encrypted Slave file?
Use a complete, unencrypted original BIN or ORI. A tool name alone does not confirm file completeness or the software version. Encrypted Slave files cannot be analysed directly.